Products
-
HK06B, KINGSTAR leg press with plate loading
-
HB012AB, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for seated leg curl (Leg Curl)
-
HB037, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for calves
-
HB015A, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for hand pinch (Pec Fly)
-
HB060, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for raising arms to the sides (Lateral Raise)
-
HB012, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for seated leg extension / lying leg curl
-
HS018C, Kingstar Smith trainer
-
PL56, KINGSTAR Plate Loaded Incline Raise Machine
-
HK048 KINGSTAR Plate Loaded Overhead Press
-
HS025C, Olympic bench with safety supports and platform KINGSTAR
-
PL91, KINGSTAR - 45° leg press with plate load
-
HS024E, KINGSTAR rack for boom discs
-
PL03, KINGSTAR Plate Loaded Unilateral Leg Press with Independent Load (ISO-LATERAL LEG PRESS)
-
HS055I, KINGSTAR Smith Weight Block Multifunctional Trainer
-
HK033C Hip abduction/adduction machine under discs
-
Olympic horizontal bench KINGSTAR, model HS025
HB-S29, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for triceps
Product Description Overall dimensions: 1680 × 1250 × 1520 mm (L × W × H) Main frame: Made of high-strength oval steel tube with a cross-section of 100 × 50 × 2.5 mm. Welding is performed using a welding robot. After sandblasting, the surface is covered with a double layer of heavy...
Description
marker
Product Description
Dimensions: 1680 × 1250 × 1520 mm (L × W × H)
Main frame: made of high-strength oval steel pipe with a cross-section of 100 × 50 × 2.5 mm. Welding is performed using a welding robot. After sandblasting, the surface is covered with a double layer of heavy duty powder coating that is highly resistant to abrasion.
Block system: The pulleys are made of POM material, which has high hardness, low coefficient of surface friction and excellent dimensional stability. The pulleys are equipped with high quality bearings.
Cable: A steel rope cable with a diameter of 6 mm is used with a maximum load of up to 1500 kg.
Seat and back: Features high-density foam cushions covered in leather.
Protective cover: Made of high quality metal 2mm thick for maximum user safety.
Weight: a set of weights made of cold-rolled steel plates with a total weight of 90 kg (5 kg × 18 pcs.) is used. The number of plates can be changed according to customer needs.
Maximum rack load: 250 kg
Basic training mode: arm extension (triceps) - press down on the block
Gross/net weight: 272 kg / 214 kg
Packing: fumigation-free wooden box
Package dimensions: 1650 × 1400 × 400 mm (L × W × H)
contact us
Related Popular Products
HS027 Incline Press Bench KINGSTAR
Overall dimensions: 135×132×107 cm (length × width × height) The frame of the product is made of high-strength oval steel pipe 100mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
HS031, KINGSTAR boom rack
Overall dimensions: 59×125×88 cm (length × width × height) The product frame is made of high-strength oval steel pipe 100mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
HS033, seated calf exerciser for KINGSTAR discs
Overall dimensions: 750×1260×850 mm (length × width × height) Product frame: made of high-strength oval steel pipe measuring 100mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
HS050A, KINGSTAR four-position machine with pin weight selection
Dimensions: 3770×1520×2370 mm (length × width × height) Main frame: made of high-strength oval steel pipe with dimensions of 100mm×50mm×2.5mm, welding is performed by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
PL114, KINGSTAR - squat machine (sed-machine) with pancake load
Product Description Dimensions: 2246 × 1643 × 1382 mm (L × W × H) Main frame...
PL06, KINGSTAR - bent-over chest row with plate load
Product Description Dimensions: 1500 × 1440 × 1370 mm (L × W × H) Main...
HS031C, KINGSTAR boom rack
Overall dimensions: 35×35×19 cm (length × width × height) The frame of the product is made of high-strength steel plate 6mm thick, welding is performed by welding robots. The metal is sandblasted, double thick powder coated surface, highly scratch resistant.
HB012A, KINGSTAR weight block exercise machine for seated leg flexion and extension
Product Description ♦ HB012A, KINGSTAR Flexion and Extension Weight Training Machine...
ES014, KINGSTAR overhead row and seated row machine
Product Description ♦ Model: ES014, KINGSTAR overhead pull-down machine...
HB012, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for seated leg extension / lying leg curl
Product Description Dimensions: 1560 × 1150 × 1520 mm (L × W × H) Main frame...
HS048G, power half rack KINGSTAR
Overall dimensions: 2060×1500×2310 mm (length × width × height) Structure frame: made of high-strength square steel profile with dimensions 75mm ×75mm ×2.5mm, welding is performed by robot welders. The steel profiles are sandblasted and then given a double thick powder coating to ensure high scratch resistance.
HS048E, KINGSTAR Block Weight Trainer with Overhead Pull Seat
Product Description ♦ HS048E, KINGSTAR Exercise Machine with Weight Block System and Seat for...
HK048 KINGSTAR Plate Loaded Overhead Press
Dimensions: 141 × 210 × 190 cm (Length × Width × Height) Main frame: Made of high-strength rectangular steel pipe measuring 80 mm × 40 mm × 2.5 mm, welding is carried out by robotic welding systems, the pipes are sandblasted, then the surface is coated with double thick powder coating with highly scratch resistant.
HB036, KINGSTAR - trainer with load selection (PIN-SELECTED) for seated horizontal rows
Product Description Overall dimensions: 520 × 1110 × 1850 mm (L × W × H) Main frame:...
PL07, KINGSTAR - wide chest press with plate load
Product Description Dimensions: 1180 × 2090 × 1720 mm (L × W × H) Main frame...
KA062 Incline Raise Trainer with Free Discs KINGSTAR
Overall dimensions: 2020×2000×760 mm (length × width × height) Frame: made of high-strength square steel pipe measuring 75×75×2.5 mm, welding is performed by a robotic welding complex. The pipes are sandblasted and then given a double thick powder coat finish to ensure high scratch resistance. The roller system with high quality bearings ensures smooth and precise running.
