-
HB-S38, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for abdominal muscles (Abdominal Machine)
-
HA043, KINGSTAR PIN SELECTED LAT PULL DOWN
-
HL057B, KINGSTAR, combination abdominal and back extension machine with pin weight selection
-
HB012AB, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for seated leg curl (Leg Curl)
-
HK09, KINGSTAR Free Disc Lower Pull Trainer
-
HL057A, KINGSTAR, abdominal muscle trainer with pin weight selection
-
HK11, free plate biceps curl machine KINGSTAR
-
KA-044
-
HK047 KINGSTAR Incline Triceps Press with Plates
-
KA-040
-
HA-S50 Cable Drive Leg Curl Exerciser with KINGSTAR Pin Weights
-
HB043, KINGSTAR - trainer with load selection (PIN-SELECTED) for Lat Pulldown
-
HB014, KINGSTAR - machine with load selection (PIN-SELECTED) for lat pulldown / seated rowing (rowing)
-
PL117, KINGSTAR - simulator for thigh muscles (leg drive/abduction) with pancake load
-
HL057, KINGSTAR, back extension machine with pin weight selection
-
PL03, KINGSTAR Plate Loaded Unilateral Leg Press with Independent Load (ISO-LATERAL LEG PRESS)
HA036, KINGSTAR Seated Horizontal Row with Pin Weights
Overall dimensions: 158×118×178 cm (length × width × height)
Main frame: Made of high-strength rectangular steel tube with dimensions of 110mm×50mm×2.5mm, welding is carried out by robot welders. After sandblasting, a double reinforced powder coating is applied with
highly resistant to scratches.
Description
marker
Product Description
Overall dimensions: 158×118×178 cm (length × width ×
height)
Main frame: Made of high-strength rectangular steel tube with dimensions of 110mm×50mm×2.5mm, welding is carried out by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
The pulley system is made of POM material. This material has high hardness, low friction coefficient and good dimensional stability. The pulleys are equipped with high-quality bearings.
Adjustable mechanism
Cable: braided steel cable with a diameter of 6mm, maximum permissible load 1000kg.
Backrests and seats: High-density foam seats with leatherette upholstery.
Protective casing: high quality PVC casing 3mm thick.
Weights: cold-rolled steel disks, total weight 90 kg (18 pcs.
5 kg each). The number of cargo discs can be adjusted according to customer requirements.
Footrest: Increased anti-slip design for increased comfort during exercise.
Maximum permissible load on cargo: 200 kg.
Basic training modes: two types of exercises - seated vertical pull-down and lat pull-down.
Packing: wooden boxes without fumigation.
Package dimensions: 183×84×53 cm (length × width × height)
contact us
Related Popular Products
HA039 Multifunctional Hip Trainer with KINGSTAR Pin Weights KINGSTAR Abdominal Pin Trainer
Dimensions: 900×1360×1620 mm (length × width × height) Main frame: made of high-strength rectangular steel pipe with dimensions of 110mm×50mm×2.5mm, welding is performed by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
Two-tray dumbbell rack KINGSTAR, model 825
Dimensions: 120×70×88 cm (length × width × height) Main frame: made of high-strength rectangular steel pipe measuring 70mm × 70mm × 3mm. Welding is performed by welding robots. The pipes are sandblasted and then given a double reinforced powder coating to ensure high scratch resistance.
HB015A, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for hand pinch (Pec Fly)
Product Description Dimensions: 1490 × 1310 × 2010 mm (L × W × H) Main...
HK04, KINGSTAR plate loaded incline press
Dimensions: 109 × 182 × 177 cm (Length × Width × Height) Main frame: made of high-strength rectangular steel pipe measuring 100 mm × 50 mm × 2.5 mm, welded by robotic welding complexes. The pipes are sandblasted and then coated with a double thick, highly scratch resistant powder coating.
PL05, KINGSTAR seated chest press and overhead row machine
Product Description ♦ PL05, KINGSTAR Seated Chest Press and Overhead Row Machine ♦ G...
HK03, overhead press machine with free plates KINGSTAR
Overall dimensions: 111×164×142 cm (length × width × height) Frame: made of high-strength rectangular steel pipe measuring 100×50×2.5 mm, welding is performed by a robotic welding complex. The pipes are sandblasted and then given a double thick powder coat finish to ensure high scratch resistance.
HK-S36, KINGSTAR Plate Loaded Glute Bridge Trainer
Product Description ♦ HK-S36, KINGSTAR Plate Loaded Gluteal Exerciser...
HO10, KINGSTAR trunk rotation machine
Overall dimensions: 960×630×870 mm (length × width × height)
HB011A, KINGSTAR - trainer with load selection (PIN-SELECTED) for hip adductor (adductor)
Product Description Dimensions: 1690 × 1710 × 1620 mm (L × W × H) Main frame...
HB014, KINGSTAR - machine with load selection (PIN-SELECTED) for lat pulldown / seated rowing (rowing)
Product Description Dimensions: 2030 × 1310 × 2180 mm (L × W × H) Main frame...
HK040 KINGSTAR Double Arm Chest Press with Plates Loading
Dimensions: 145 × 195 × 140 cm (Length × Width × Height) Main frame: made of high-strength rectangular steel pipe measuring 80 mm × 40 mm × 2.5 mm, welded by robotic welding complexes. The pipes are sandblasted and then coated with a double thick, highly scratch resistant powder coating.
Roman chair KINGSTAR, model HK21
Dimensions: 1540×710×840 mm (length × width × height) Main frame: made of high-strength square steel tube with dimensions of 700mm × 70mm × 2.5mm. Welding is performed by welding robots. The pipes are sandblasted and then given a double reinforced powder coating to ensure high scratch resistance.
