Products
-
HB017, KINGSTAR - machine with load selection (PIN-SELECTED) for leg press / calf press
-
Adjustable FID bench with chrome wave profile KINGSTAR, model KA068AG
-
PL13, KINGSTAR - seated row with plate load (DY Row)
-
HB034, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for the muscles of the upper limbs
-
Model DC86, KINGSTAR home treadmill
-
Adjustable bench KINGSTAR, model HS023
-
HB039, KINGSTAR - multifunctional exercise machine with load selection (PIN-SELECTED) for thigh muscles
-
HK11, free plate biceps curl machine KINGSTAR
-
HS033, seated calf exerciser for KINGSTAR discs
-
KINGSTAR outdoor ladder, model 407
-
YK45092D, KINGSTAR Home Bench Superior (including all attachments)
-
HS032A, KINGSTAR Vertical Knee Raise Trainer
-
HB012A, KINGSTAR weight block exercise machine for seated leg flexion and extension
-
PL20, KINGSTAR – arm curl (biceps) with plate load
-
Product Description: HS021A, KINGSTAR HYPER EXTENSION
-
HB037, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for calves
HB015B, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for rear deltoid
Product Description Overall dimensions: 1490 × 1310 × 2010 mm (L × W × H) Main frame: Made of high-strength oval steel tube with a cross-section of 100 × 50 × 2.5 mm. Welding is performed using a welding robot. After sandblasting, the surface is covered with a double layer of heavy...
Description
marker
Product Description
Dimensions: 1490 × 1310 × 2010 mm (L × W × H)
Main frame: made of high-strength oval steel pipe with a cross-section of 100 × 50 × 2.5 mm. Welding is performed using a welding robot. After sandblasting, the surface is covered with a double layer of heavy duty powder coating that is highly resistant to abrasion.
Block system: The pulleys are made of POM material, which has high hardness, low coefficient of surface friction and excellent dimensional stability. The pulleys are equipped with high quality bearings.
Cable: A steel rope cable with a diameter of 6 mm is used with a maximum load of up to 1500 kg.
Seat and back: Features high-density foam cushions covered in leather.
Protective cover: made of 2 mm thick metal for maximum user safety.
Weight: a set of weights made of cold-rolled steel plates with a total weight of 90 kg (5 kg × 18 pcs.) is used. The number of plates can be changed according to customer needs.
Adjustment mechanisms:
– the seat has 5 height adjustment positions to adapt to the user’s height;
– the hand levers have 2 angle adjustment positions to adapt to different trajectories and ranges of movement.
Maximum rack load: 250 kg
Basic training mode: bent over raises (training the rear deltoid muscles)
Gross/net weight: 260 kg / 217 kg
Packing: fumigation-free wooden box
Package dimensions: 2030 × 1030 × 500 mm (L × W × H)
contact us
Related Popular Products
PL56, KINGSTAR Plate Loaded Incline Raise Machine
Product Description ♦ PL56, KINGSTAR Plate Loaded Raise Machine...
PL06, KINGSTAR - bent-over chest row with plate load
Product Description Dimensions: 1500 × 1440 × 1370 mm (L × W × H) Main...
HS025B, KINGSTAR Multifunctional Power Rack
Overall dimensions: 114×163×190 cm (length × width × height) The product frame is made of high-strength oval steel pipe 100mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
HB-S35, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for Standing Glute Kickback
Product Description Dimensions: 1890 × 990 × 1680 mm (L × W × H) Main frame:...
HS028A, biceps bench (precher-curl) KINGSTAR
Overall dimensions: 120×84×116 cm (length × width × height) The product frame is made of high-strength oval steel pipe 100mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
KA033, ball rack for 10 pcs. KINGSTAR
Overall dimensions: 81×57×174 cm (length × width × height) The frame of the product is made of high-strength round steel pipe 50mm ×50mm ×2.5mm, welding is performed by welding robots. The pipes are sandblasted and then given a double thick powder coating that is highly scratch resistant.
HB011A, KINGSTAR - trainer with load selection (PIN-SELECTED) for hip adductor (adductor)
Product Description Dimensions: 1690 × 1710 × 1620 mm (L × W × H) Main frame...
PL21, KINGSTAR - overhead press (shoulder press) with plate load
Product Description Dimensions: 1860 × 1460 × 1920 mm (L × W × H) Main frame...
HS048H, KINGSTAR load frame
Dimensions: 1840×2040×2290 mm (length × width × height) Main frame: made of high-strength square steel pipe with dimensions of 75mm×75mm×2.5mm, welding is carried out by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
HB057A, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for abdominal muscles (Abdominal Machine)
Product Description Dimensions: 1130 × 1190 × 1620 mm (L × W × H) Main...
DC85 Model DC85, home treadmill KINGSTAR
♦Display:LED display ♦Functions:time, distance traveled, speed, pulse, calories ♦Programs: P1-P20 ♦Electric motor: DC, 1.25 hp. ♦Speed: : 1‑10 km/h ♦Usable area of the running belt: 105×42 cm ♦Electric tilt angle adjustment: no ♦Folding design: yes ♦Maximum permissible user load:120 kg ♦Transport rollers: yes ♦Using conditions: for home use ♦Weight gross / net weight: 32 kg / 28 kg ♦ Loading volume: 105 pcs. per 20‑foot container ♦250 pcs. for a 40‑foot high-height container
HK033C, KINGSTAR 3D Hip Abduction Trainer with Disc Loading
Dimensions: 1500 mm × 1040 mm × 1100 mm (Length × Width × Height) Main frame: Made of high-strength oval steel pipe measuring 70 mm × 50 mm × 2.5 mm, welding is performed by robotic welding complexes. The pipes are sandblasted and then coated with a double thick, highly scratch resistant powder coating.
HK046A, KINGSTAR standing leg abduction machine with disc loading
Dimensions: 1380 × 1230 × 1320 mm (Length × Width × Height) Main frame: made of high-strength rectangular steel pipe measuring 80 mm × 40 mm × 2.5 mm, welding is carried out by robotic welding complexes, the pipes are sandblasted, and then double thick is applied to the surface Powder coated with high scratch resistance. Roller system with high quality bearings ensures smooth and precise operation.
HB016, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for biceps / triceps
Product Description Dimensions: 1100 × 1160 × 1620 mm (L × W × H) Main frame...
PL25, KINGSTAR - seated lower row (horizontal rowing) with plate load
Product Description Dimensions: 1230 × 1690 × 1690 mm (L × W × H) Main...
PL13, KINGSTAR - seated row with plate load (DY Row)
Product Description Dimensions: 1550 × 1340 × 1220 mm (L × W × H) Main frame...
