-
HB016, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for biceps / triceps
-
PL28, KINGSTAR - bench chest press with plate load
-
HL057A, KINGSTAR, abdominal muscle trainer with pin weight selection
-
ST02, KINGSTAR exercise machine for stretching the muscles of the shoulder girdle
-
HS018C, Kingstar Smith trainer
-
HK-S36, KINGSTAR Plate Loaded Glute Bridge Trainer
-
PL22, KINGSTAR - squats and lunges with a plate load
-
HL-S42, KINGSTAR PIN SELECTED “Improved pelvic thrust trainer with stacked weights”
-
HS031B, KINGSTAR boom rack
-
PL91, KINGSTAR - 45° leg press with plate load
-
KA-028
-
Model DC86, KINGSTAR home treadmill
-
KA009A
-
PL71A, KINGSTAR Plate Loaded Squat Machine (Hack Squats)
-
HB060, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for raising arms to the sides (Lateral Raise)
-
HL017A, KINGSTAR PIN SELECTED Horizontal Leg Press
HS048I, KINGSTAR load frame with pulley system
Overall dimensions: 1870×2570×2320 mm (length × width × height)
Main frame: Made of high-strength square steel tube with dimensions of 75mm×75mm×2.5mm, welding is carried out by welding robots. The steel pipes are sandblasted and then coated with a double reinforced powder coating that is highly scratch resistant.
Description
marker
Product Description
Overall dimensions: 1870×2570×2320 mm (length × width × height)
Main frame: Made of high-strength square steel tube with dimensions of 75mm×75mm×2.5mm, welding is carried out by welding robots. The steel pipes are sandblasted and then coated with a double reinforced powder coating that is highly scratch resistant.
The pulley system is equipped with high quality alloy steel bearings, ensuring smooth and precise running. The cable system is steel braided wire with an external polyurethane coating.
Cable: braided steel cable with a diameter of 6mm, maximum permissible load 1500kg.
Back and seat cushions: seat made of high-density polyurethane foam, surface covered with leatherette.
Protective casing: 2mm thick metal casing ensures maximum user safety.
Weights: weight disks made of cold-rolled steel, only 1 set weighing 90 kg (18 disks of 5 kg each). The number of cargo discs can be adjusted according to customer requirements.
Includes: multifunction pull-up handle, safety bars, barbell hooks,
hooks for rubber shock absorbers, holders for rod discs.
Adjustable Mechanisms
Adjustable Handlebar: 15-level height adjustment for different movement paths.
Pull-ups: adjustable handle width, stainless steel adjustment tube with digital markings.
Maximum permissible load on cargo: 200kg
Basic training modes: adjustable handle exercises, pull-ups.
Packing: non-fumigated wooden box
Gross weight / net weight: 431kg / 351kg
Package dimensions: 2430×1330×550 mm (length × width × height)
contact us
Related Popular Products
HA-S50 Cable Drive Leg Curl Exerciser with KINGSTAR Pin Weights
Dimensions: 121×77×162 cm (length × width × height) Main frame: made of high-strength oval steel pipe measuring 100mm×50mm×2.5mm, welding is performed by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
HA015B, strength training machine KINGSTAR PIN SELECTED rear delt raises
Overall dimensions: 149 × 131 × 201 cm (length × width × height). Main Frame: Made of 110mm×50mm×2.5mm high-strength rectangular steel tube by robot welding.
HS055A, KINGSTAR functional trainer
Dimensions: 121×162×232 cm (length × width × height) Main frame: made of high-strength square steel pipe with dimensions of 60mm×60mm×2.5mm, welding is carried out by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
HS019J, multifunctional simulator for 5 workstations KINGSTAR
Dimensions: 4400×4350×2390 mm (length × width × height) Main frame: made of high-strength oval steel pipe with dimensions of 100mm×50mm×2.5mm, welding is performed by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
HS019FA, single-sided KINGSTAR crossover
Dimensions: 900×850×225 mm (length × width × height) Main frame: made of high-strength oval steel pipe with dimensions of 100mm×50mm×2.5mm, welding is performed by robot welders. After sandblasting, a double reinforced powder coating with high scratch resistance is applied.
HS048G, power half rack KINGSTAR
Overall dimensions: 2060×1500×2310 mm (length × width × height) Structure frame: made of high-strength square steel profile with dimensions 75mm ×75mm ×2.5mm, welding is performed by robot welders. The steel profiles are sandblasted and then given a double thick powder coating to ensure high scratch resistance.
HK046A, KINGSTAR Plate Loaded Standing Leg Extension (Back Leg Press)
Product Description ♦ Model: HK046A KINGSTAR Plate Load Extension Machine...
PL29, KINGSTAR – seated biceps curl with plate load
Product Description Dimensions: 1370 × 1500 × 1520 mm (L × W × H) Main frame...
PL96, KINGSTAR - rod stand
Product Description Dimensions: 980 × 750 × 1520 mm (L × W × H) Main...
FID Adjustable Bench with KINGSTAR Chrome Wave Profile, Model KA068AG
Dimensions: 133×68×118 cm (length × width × height) Main frame: made of high-strength rectangular steel pipe measuring 100mm × 50mm × 2.5mm. Welding is performed by welding robots. The pipes are sandblasted and then given a double reinforced powder coating to ensure high scratch resistance.
HB-S49, KINGSTAR - exercise machine with load selection (PIN-SELECTED) for back extension (Back Extension)
Product Description Dimensions: 1320 × 1030 × 1880 mm (L × W × H) Main frame...
HO07, KINGSTAR leg press machine
Overall dimensions: 1490×680×1290 mm (length × width × height)
HS018C, Kingstar Smith trainer
Overall dimensions: 134×217×228 cm (length × width × height) Structure frame: made of high-strength oval steel profile measuring 100mm ×50mm ×2.5mm, welding is performed by robot welders. The steel profiles are sandblasted and then given a double thick powder coating to ensure high scratch resistance.
